FRP for Water and Wastewater Treatment

Water treatment is where FRP quietly outperforms everything else, because the conditions that destroy metal — permanently wet, chlorine, hydrogen sulphide — do nothing to a correctly specified laminate.

The chemistry that matters here

  • Sodium hypochlorite. The most common single reason FRP is chosen in this industry. It is aggressive, it degrades and gases off, and it narrows the resin choice considerably. It also makes the vent a safety item rather than a fitting.
  • Hydrogen sulphide. The reason odour control exists. Wet H₂S in a headspace produces sulphuric acid on the surfaces above the liquid, which is why the top of a wastewater vessel often corrodes before the bottom.
  • Ferric chloride, aluminium sulphate, polymer. Coagulants and flocculants. Generally straightforward chemically, but heavy — check the specific gravity before sizing anything.
  • Sulphuric acid and caustic soda, for pH correction.

Odour control is really a ducting problem

Most odour-control projects are not about the scrubber. They are about the duct that reaches it: long runs of wet, warm, H₂S-laden air at low pressure, usually on the suction side of a fan.

That last point matters more than anything else in the design. A duct on the suction side sees vacuum, and vacuum collapses ducts. Tell us what the fan can pull with a filter blinded or a damper closed — not what it pulls on a good day.

Decades of life on a public budget

Municipal buyers usually spend public money against a lowest-price rule, which makes an honest comparison worth writing down:

FRPCoated steelStainless
Purchase costHigherLowerHighest
RecoatingNoneEvery few yearsNone
In hypochloriteExcellent, with the right resinCoating failsAttacked
In a wet H₂S headspaceExcellentPoorVaries by alloy
Service lifeDecadesLimited by the coatingAlloy-dependent

Where a coated steel tank needs its coating maintained inside a live plant, that maintenance is usually the larger number across the life of the asset — and it is the number that does not appear on the purchase order.

Typical equipment

Chlorination and chemical dosing tanks, bulk chemical storage, odour-control ducting and scrubbers, launder and channel covers, effluent piping, and grating and walkways over channels and tanks.

Contact a sales engineer

Choose your preferred contact method

Posted on • by PITSA FRP