FRP for Food and Beverage Plants
Food plants are the one industry where the product in the tank is usually the least aggressive thing it will ever hold.
The cleaning cycle decides the resin, not the product
Fruit juice, syrup, brine, potable water and process water are chemically undemanding. What is demanding is what happens between batches.
Clean-in-place cycles run hot caustic, sometimes hot acid, at temperatures well above the process. A resin comfortable with the product all day can be degraded by the wash that follows it, because chemical resistance falls as temperature rises and CIP is where both the chemistry and the heat peak at once.
So the questions are:
- The CIP chemistry — caustic, acid, or both, and at what concentration.
- The CIP temperature, which is usually the highest the tank ever sees.
- The frequency. A daily cycle for twenty years is a different exposure from a monthly one.
Specify the tank against the cleaning cycle and the product takes care of itself. Do it the other way round and the tank is designed for the easy part.
Food-grade and potable water
Where the tank holds product or drinking water, the resin system must be suitable for food contact, and the surface must be finished so it can actually be cleaned — a rough or porous inner surface holds residue no cycle will reach.
Tell us at enquiry stage which approval or certification the plant, the customer or the regulator requires. It narrows the resin choice, and it is much cheaper as a starting condition than as a retrofit.
Wash-down environments
Beyond the tanks, a food plant is a wet building, and that is where FRP grating earns its place. Constant wash-down, food acids and cleaning chemicals end galvanized grating quickly, and FRP grating does not rust into a product stream — which is a food-safety argument as much as a maintenance one.
Typical equipment
Potable and process water tanks, ingredient and syrup storage, brine tanks, CIP chemical storage, effluent treatment, wash-down area grating and walkways, and ducting for kitchen and process extraction.
What to send us
- The product, its temperature, and its specific gravity.
- The CIP chemistry, temperature and frequency — the answer that matters most.
- Any food-contact or potable-water requirement the plant must meet.
- Fill and discharge rates, for vent sizing.
- Site location, for seismic and wind loading.
Contact a sales engineer
Choose your preferred contact method