FRP Fundamentals
FRP is a composite material made from two main components: glass fiber (structural strength) and resin (chemical resistance). Individually each is weak or brittle; combined they create a material that is light, strong, and virtually immune to corrosion.
Why industry uses it
Plants choose FRP over steel, concrete or thermoplastics when the process involves:
- Aggressive chemicals (acids, salts, alkaline solutions)
- Moderate temperatures (typically up to 120–150°C with the right resin)
- Marine or high-humidity environments
- Complex geometries without welds
Quick comparison
Well-manufactured FRP laminate
- Fiber evenly oriented per structural design
- No visible voids or porosity
- Smooth, consistent inner gelcoat
- Thickness within tolerance (±5% of spec)
Poor laminate
- Misaligned fiber, dry spots
- Visible air bubbles (porosity)
- Thin, cratered or bare gelcoat zones
- Thickness below 90% of spec
Key takeaway
FRP quality is decided at manufacturing, not at the quote stage. Two suppliers with identical data sheets can deliver products with very different service lives.
This chapter is an initial draft. Edit it in the admin panel to add images and examples from your own projects.
Table of contents
Posted on • by PITSA FRP